Barco – ScreenPRO-II Controller

1,200.00

BARCO SCREENPRO II Remote/Controller with tally. Good working condition, including case, lamp.


1 in stock

Enquire
SKU: lawc-15589 Category:
1 in stock

Description

BARCO SCREENPRO II Remote/Controller with tally.

Good working condition, including case, lamp.

Condition

Good

Brand

Warranty

30-days

Barco ScreenPRO-II Controller

Barco ScreenPRO-II Controller

Manufacturer's Description

This device adds flexibility and greater control to multi-screen and single screen events. The Barco ScreenPRO-II Controller enhances PIP and KEY placement, source switching, and layer control options during a presentation.
The Barco ScreenPRO-II Controller includes access to 36 presets, available to the operator at a touch of a button. Preset recalls include items such as sources, layer functions and transition effects simplifying the control of single screen or multi-screen events. The controller also allows for remote switching of the MatrixPRO routers encasing the total flexibility and capacity of the presentation system. The controller works with up to 16 inputs, any mixture of RGBHV analog signals and SDI/ HDSDI, DVI signals, from both external routers and the built in routers of the ScreenPRO II. The ScreenPRO II controller is available with a tally and a PS2 Keyboard card. The tally card triggers tally lights on Camera CCU units or other devices. The PS/2 Port allows for a PS/2 keyboard to be connected simplifying setup functions. Combined with the ScreenPRO-II Processors and a BlendPRO-II, the ScreenPRO-II Controller can manage blended screens up to 4 projectors wide. In addition, the controller can manage four auxillary outputs when used with an external router. If needed, the ScreenPRO-II controller can tie in ImagePRO processors to the AUX outputs so that all signals are scaled to a preset resolution and format.

Features of the Barco ScreenPRO-II -

  • Backup option to removable Media Card
  • Four (4) AUX output control
  • 3.8" LCD Display with eight (8) buttons and two (2) knobs for easy set up
  • External router control via Ethernet or RS-232
  • Control of BlendPRO-II system

Specifications

Video Routing
Input capability: Up to 16 input sources Output destinations: 1-4 ScreenPRO II processors External router Control: Up to 3 External Routers: 1 Analog, 1 SDI/ HDSDI, 1 DVI
Operator Control
Display: 3.8” LCD Touch Screen Joystick: 3-Axis (X,Y and Z) T-Bar: Analog T-Bar with smooth movement Presets: 36 (6 pages of 6 Presets) Destinations: 8 Total Destinations (4 ScreenPRO II and 4 AUX)
Control/Remote
Ethernet: 1 RJ-45 (F) connector, running 10/100 Base-T, half/full duplex w/ auto detect Ethernet Protocol: ICMP (ping), TCP/Ethernet Protocol CP/IP, Telnet Serial Control Ports: 2- RS-232 ports, each 9-pin female D connector Baud rate and Protocol: 115K Baud, 8-bit, 1 stop, no parity selectable Keyboard Port (Optional): PS/2 Connector Tally (Optional): DB-25 Male, Dry-Contact Relay Closures: 1 Amp at 30 VDC, .5 Amps at 125 VDC Backup option: Removable Media Card, Type 1 Compact Flash Compliant
Enclosure
Dimensions: 5.95” H X 17.0” W X 10” D (2U high, full rack width) 15.13cm H X 43.2 cm W X 25.4 cm D Weight: 12 lbs (5.45 kg) Console Light: XLR type Connector
Environmental
Temperature: 0-40° C Environmental Humidity: 0-95%, non-condensing Power Type: 100-240 VAC – 50/60 Hz. Auto Selecting 1.0A Max

Additional information

Condition

Good

Brand

Warranty

30-days

Reviews

There are no reviews yet.

Be the first to review “Barco – ScreenPRO-II Controller”

This site uses Akismet to reduce spam. Learn how your comment data is processed.