d&b Audiotechnik J-Series Package

472,225.00

For sale a used d&b Audiotechnik J-Series Package. All in good condition and the price shown is for the complete package.


1 in stock

Enquire
SKU: labd-98783 Categories: , , , ,
1 in stock
not image 125747
not image 125749

Description

Used d&b Audiotechnik J-Series Package.

  • Good condition, fully operational
  • Complete with all amps, racks, frames & steelwork
  • Price is for complete package

Package includes:

  • 44 x J8
  • 10 x J12
  • 16 x J sub
  • 8 x J infra
  • 18 x d&b D12 triple rack, LKS out
  • 1 x D&B D12, EP-5 out
  • 3 x J-series flying frame dolly
  • 6 x J-series Flying Frame
  • 6 x J 2-leg Safety chain
  • 16 x J-Sub Wooden lid
  • 8 x J-Infra Wooden lid
  • 54 x J8 / J12 Wheelboard
Brand

Condition

Good

Warranty

72-hours

d&b audiotechnik D12

d&b-audiotechnik-D12

Manufacturer's Description

d&b audiotechnik D12 is a 3 RU, two channel amplifier delivering medium to high power into low impedance loads between 4 and 16 ohms.

d&b audiotechnik D12

Main features and specification for d&b audiotechnik D12 Dual channel amplifier:
  • Maximum output power 2 x 1200 W into 4 Ω

Digital Signal Processing

  • Equalizer: 4-band PEQ/Notch
  • Latency analog and digital inputs: 0.3 msec.
  • Delay setting: 0.3 - 340 msec. with 0.1 msec. detents
  • Configurations: current d&b loudspeakers and linear mode
  • Function switches: d&b loudspeaker specific circuits
  • Frequency generator: Pink noise or Sine wave
  • Sampling rate: 96 kHz/27 Bit ADC/24 Bit DAC

Controls and indicators

  • Power: Mains power switch
  • Scroll/Edit: Digital rotary encoder
  • Display: Liquid Crystal Display (LCD)/120 x 32 pixel
  • ISP, GR, OVL A/B: LED indicators

Connectors

  • INPUT ANALOG (A1, A2)" 3 pin XLR female
  • ANALOG LINK (A1, A2): 3 pin XLR male
  • INPUT DIGITAL (D1, D2): 3 pin XLR female AES 3
  • DIGITAL LINK (Output): 3 pin XLR male
  • Sampling rate: 48 kHz/96 kHz
  • OUT CHANNEL A/B: NL4; optional EP5/NL8
  • REMOTE: 2 x RJ 45 parallel, CAN-Bus
  • SERVICE: SUB-D9 female
  • Mains connector: powerCON® 1

Data (linear setting with subsonic filter) for d&b audiotechnik D12

  • S/N ratio (unweighted, RMS): > 110 dBr
  • Rated output power (THD + N < 0.5%, both channels driven): CF = 6 dB at 4 / 8 ohms: 2 x 1200 / 750 W CF = 12 dB at 4 / 8 ohms: 2 x 1600 / 800 W
Power supply
  • Autosensing switch mode power supply for: 115/230 V, 50 - 60 Hz; optional 100/200 V, 50 - 60 Hz

Dimensions / weight

  • Dimensions (H x W x D): 3 RU x 19” x 353 mm/13.9”
  • Weight: 13 kg / 28.7 lb

d&b audiotechnik D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user to apply definable settings of up to 340 msec (=100 m/328.1 ft) independently to each channel. The same applies to the 4-band parametric equalizer. It provides optional boost/cut or notch filtering.

d&b D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier.

The D12 utilizes an autosensing switch mode power supply for mains voltages 120 V/230 V, 50 - 60 Hz (optional 100/200V). The D12 amplifier incorporates d&b SenseDrive for accurate control of LF drivers in d&b loudspeakers driven in 2-Way Active mode or in actively driven d&b subwoofers.

When the d&b D12 is fitted with EP5 connectors and appropriate 5 wire cabling, it can use d&b SenseDrive. It results in an extremely precise bass performance even at high levels.

NL4 and NL8 connector options are also available.

RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition. Also d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively.

d&b audiotechnik D12 is ideally suited for use in both mobile and installation environments. Did not find what you need? Send us an enquiry _______________________________
Glossary: d&b d12, d&b D 12, d&b D-12, dbaudio d12


d&b audiotechnik J-INFRA

d&b-audiotechnik-J-INFRA

Manufacturer's Description

d&b audiotechnik J-INFRA is a large format cardioid subwoofer. It extends the frequency response of J-Series powerhouse system even further.

d&b audiotechnik J-INFRA

d&b J-INFRA

  • Components 3 x 21"
  • Dispersion Cardioid
  • max SPL 144 dB
d&b audiotechnik J-INFRA is a cardioid infra subwoofer. Use it to supplement J-Series systems consisting of J8, J12 and J-SUB cabinets. d&b J-INFRA extends the frequency response of a J-Series system down to 27 Hz. Only use it in ground stacked configurations in conventional left/right set-ups, as well as arranged in an infra subwoofer array. J-INFRA has two bass-reflex chambers containing three 21" drivers, two facing forward in one chamber - they are driven from one channel of the d&b amplifier - and one facing backwards, driven by another amplifier channel. Through this driver set-up its cardioid dispersion pattern avoids unwanted energy behind the system. It also greatly reduces the reverberant field at low frequencies and provide highest accuracy in low frequency reproduction. Select Hypercardioid mode in the amplifier to optimise the tuning of front and rear channels. It allows to achieve a maximum rejection at the left and right sides behind the cabinet. d&b J-INFRA cabinet construction is from marine plywood. It has an impact and weather protection PCP (Polyurea Cabinet Protection) finish. The front and rear of the loudspeaker cabinet have a protection by a rigid metal grill. The side panels incorporate eight handles. The cabinet front has four catches to secure an optional wooden lid. Use d&b D80 amplifier to drive the J-INFRA. Also possible to use the d&b 30D. The 2-Way active mode for the J-INFRA requires two channels of the D80.
Did not find what you need? Send us an enquiry


d&b audiotechnik J-SUB

d&b-audiotechnik-J-SUB

Manufacturer's Description

d&b audiotechnik J-SUB is a large format flyable cardioid subwoofer. It offers cardioid performance to avoid unwanted energy behind the system, all mechanically compatible in flown or ground stacked arrays.

d&b audiotechnik J-SUB

d&b J-SUB large format flyable cardioid subwoofer

  • Components 3 x 18"
  • Dispersion Cardioid
  • max SPL 139 dB
d&b audiotechnik J-SUB is an actively driven 2-way bass-reflex design. It houses three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system. It greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. Use the d&b J-SUB cabinets to supplement J8 and J12 loudspeakers in various combinations: ground stack them or fly, either integrate on top of a J8 / J12 array or as a separate column. The d&b audiotechnik J-SUB cabinet construction is from marine plywood. It has an impact and weather protection PCP (Polyurea Cabinet Protection) finish. The front and rear of the loudspeaker cabinet are protected by a rigid metal grill and the side panels incorporate eight handles. There are four 100 mm wheels and one EP5 or NL8 connector mounted at the rear. Use d&b D80 and 30D amplifiers to drive the J-SUB. The 2-Way active mode for the d&b J-SUB requires two channels of the D80. Did not find what you need? Send us an enquiry


d&b audiotechnik J12

d&b-audiotechnik-J12

Manufacturer's Description

d&b audiotechnik J12 is a Large format 3-way line array loudspeaker. Complete with other d&b J-series components, this touring industry standard line array system is suitable for any style, genre or event size.

d&b audiotechnik J12

d&b J12 large format 3-way line array loudspeaker

  • Components 2 x 12"/1 x 10"/2 x 1.4"
  • Dispersion 120°
  • max SPL 145 dB
d&b audiotechnik J12 is a 3-way design. It houses 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables to fly vertical columns of up to 24 loudspeakers. Suspend them using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers the exceptional 120° horizontal constant directivity dispersion control is nominally down to 250 Hz. The d&b J12 is acoustically and mechanically compatible to the J8 loudspeaker. Use it in columns of purely J12 loudspeakers or in combination with J8s and / or with J-SUBs. d&b audiotechnik J12 cabinet construction is from marine plywood. It has an impact and weather protection PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet has a protection by a rigid metal grill. The side and rear panels incorporate four handles. There are also two NLT4F/M, EP5 or NL8 connectors wired in parallel mounted at the rear. Did not find what you need? Send us an enquiry


d&b audiotechnik J8

d&b-audiotechnik-J8

Manufacturer's Description

d&b audiotechnik J8 is a large format 3-way line array loudspeaker. It is a large scale, but still flexible, sound reinforcement solution.

d&b audiotechnik J8

d&b J8 Large format 3-way line array loudspeaker

  • Components 2 x 12"/10"/2 x 1.4"
  • Dispersion 80°
  • max SPL 145 dB
d&b audiotechnik J8 is a 3-way design. It houses 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design of d&b J8 enables to fly vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers, the exceptional 80° horizontal constant directivity dispersion control is nominally down to 250 Hz. The J8 is acoustically and mechanically compatible with the J12 loudspeaker. Use it in columns of purely J8 loudspeakers or in combination with J12s and / or with J-SUBs. The d&b J8 cabinet construction is from marine plywood and has an impact and weather protection PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet has a protection by a rigid metal grill. The side and rear panels incorporate four handles. There are also two NLT4F/M, EP5 or NL8 connectors wired in parallel mounted at the rear. Did not find what you need? Send us an enquiry

Additional information

Brand

Condition

Good

Warranty

72-hours

Reviews

There are no reviews yet.

Be the first to review “d&b Audiotechnik J-Series Package”

This site uses Akismet to reduce spam. Learn how your comment data is processed.