d&b Audiotechnik J System

295,000.00

For sale a used d&b Audiotechnik J System that is in good condition and the price shown is for the complete system below.


1 in stock

Enquire
SKU: lbmh-98690 Categories: , ,
1 in stock

Description

Used d&b Audiotechnik J Line Array Loudspeaker System.

  • < 3 years old
  • Price is for complete system
  • All in good condition

System Includes:

  • 20 x J8
  • 4 x J12
  • 6 x Cart TDA Style for J8/J12
  • 6 x Cordura Cover 4x J8/12
  • 8 x Wheelboard d&b J8/J12
  • 8 x Cordura Cover 1x J8/12
  • 21 x J-Sub
  • 21 x Front Lid Sub
  • 7 x Cart TDA Style
  • 11 x  Cordura Cover 1x J-Sub
  • 6 x J-Infra
  • 6 x Font Lid Infra
  • 3 x Cart TDA Style
  • 6 x Cordura Cover 1x J-Infra
  • 4 x J-Flyingframe with safety chain as a pair in Amptown-Case
Brand

Condition

Good

Packaging included in Price

Yes – included in price

Warranty

72-hours

d&b audiotechnik J-SUB

d&b-audiotechnik-J-SUB

Manufacturer's Description

d&b audiotechnik J-SUB is a large format flyable cardioid subwoofer. It offers cardioid performance to avoid unwanted energy behind the system, all mechanically compatible in flown or ground stacked arrays.

d&b audiotechnik J-SUB

d&b J-SUB large format flyable cardioid subwoofer

  • Components 3 x 18"
  • Dispersion Cardioid
  • max SPL 139 dB
d&b audiotechnik J-SUB is an actively driven 2-way bass-reflex design. It houses three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system. It greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. Use the d&b J-SUB cabinets to supplement J8 and J12 loudspeakers in various combinations: ground stack them or fly, either integrate on top of a J8 / J12 array or as a separate column. The d&b audiotechnik J-SUB cabinet construction is from marine plywood. It has an impact and weather protection PCP (Polyurea Cabinet Protection) finish. The front and rear of the loudspeaker cabinet are protected by a rigid metal grill and the side panels incorporate eight handles. There are four 100 mm wheels and one EP5 or NL8 connector mounted at the rear. Use d&b D80 and 30D amplifiers to drive the J-SUB. The 2-Way active mode for the d&b J-SUB requires two channels of the D80. Did not find what you need? Send us an enquiry


d&b audiotechnik J12

d&b-audiotechnik-J12

Manufacturer's Description

d&b audiotechnik J12 is a Large format 3-way line array loudspeaker. Complete with other d&b J-series components, this touring industry standard line array system is suitable for any style, genre or event size.

d&b audiotechnik J12

d&b J12 large format 3-way line array loudspeaker

  • Components 2 x 12"/1 x 10"/2 x 1.4"
  • Dispersion 120°
  • max SPL 145 dB
d&b audiotechnik J12 is a 3-way design. It houses 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables to fly vertical columns of up to 24 loudspeakers. Suspend them using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers the exceptional 120° horizontal constant directivity dispersion control is nominally down to 250 Hz. The d&b J12 is acoustically and mechanically compatible to the J8 loudspeaker. Use it in columns of purely J12 loudspeakers or in combination with J8s and / or with J-SUBs. d&b audiotechnik J12 cabinet construction is from marine plywood. It has an impact and weather protection PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet has a protection by a rigid metal grill. The side and rear panels incorporate four handles. There are also two NLT4F/M, EP5 or NL8 connectors wired in parallel mounted at the rear. Did not find what you need? Send us an enquiry


d&b audiotechnik J8

d&b-audiotechnik-J8

Manufacturer's Description

d&b audiotechnik J8 is a large format 3-way line array loudspeaker. It is a large scale, but still flexible, sound reinforcement solution.

d&b audiotechnik J8

d&b J8 Large format 3-way line array loudspeaker

  • Components 2 x 12"/10"/2 x 1.4"
  • Dispersion 80°
  • max SPL 145 dB
d&b audiotechnik J8 is a 3-way design. It houses 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design of d&b J8 enables to fly vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers, the exceptional 80° horizontal constant directivity dispersion control is nominally down to 250 Hz. The J8 is acoustically and mechanically compatible with the J12 loudspeaker. Use it in columns of purely J8 loudspeakers or in combination with J12s and / or with J-SUBs. The d&b J8 cabinet construction is from marine plywood and has an impact and weather protection PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet has a protection by a rigid metal grill. The side and rear panels incorporate four handles. There are also two NLT4F/M, EP5 or NL8 connectors wired in parallel mounted at the rear. Did not find what you need? Send us an enquiry

Additional information

Brand

Condition

Good

Packaging included in Price

Yes – included in price

Warranty

72-hours

Reviews

There are no reviews yet.

Be the first to review “d&b Audiotechnik J System”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.