d&b audiotechnik V8
d&b V8 High performance 3-way passive line array loudspeaker
- Components – 2 x 10″/1 x 8″/2 x 1.4″
- Dispersion – 80º
- Max SPL – 142 dB
d&b audiotechnik V8 is a 3-way passive design. It houses 2 x 10″ LF drivers, one hornloaded 8″ MF driver and two 1.4″ exit HF compression drivers with 2.5″ voicecoils mounted to a dedicated waveshaping device.
The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 80° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz.
The mechanical and acoustical design enables to fly vertical arrays of up to twenty four loudspeakers. Use it in columns of purely V8 loudspeakers or in combination with V12s and / or with V-SUBs.
d&b V8 cabinet construction is from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish.
The front of the loudspeaker cabinet has a protection by a rigid metal grill with an acoustically transparent foam. Each side panel incorporates a handle, while there are two additional recessed grips at the rear bottom of the cabinet.
The d&b D80 amplifier is recommended to drive the V8. The d&b D20 and 30D can also be used.
Did not find what you need? Send us an enquiry