L-Acoustics Bumpers, Rigging and Dollies (all models)
L-Acoustics Bumpers, Rigging and Dollies (all models) include the WIFOBUMP2, WIFOBUMP2, KARA-MINIBU, KARA-MINIBUEX, K2-BUMP and other frames and dollies designed specifically for L'Acoustics speaker systems and line arrays.
L-Acoustics Bumpers, Rigging and Dollies (all models) include the WIFOBUMP2, WIFOBUMP2, KARA-MINIBU, KARA-MINIBUEX, K2-BUMP
Rigging frame for flying a vertical ARCS WIDE/FOCUS/SB18m array. Certified for up to 8 ARCS WIDE/FOCUS or SB18m
Rigging bar for flying a horizontal ARCS WIDE/FOCUS array. Certified for up to 4 ARCS WIDE/FOCUS enclosures.
Pole mount socket for 1 ARCS WIDE/FOCUS enclosure
Clamp certified for up to 6 ARCS WIDE/FOCUS or 4 SB18m
Support for stacking and tilting up to 4 ARCS WIFO on SB18m
The KARA-ANGARMEX is an optional extension arm for the stacking platform (built from M-BUMP or KARAMINIBU), to be used by two units, and providing extra 10° downwards site angle for the bottom enclosure of stacked KARA® or SB18 arrays.
The KARA-DOWNK1 is a frame designed to allow the attachment of a KARA® array under a K1 array.
The KARA-MINIBU is a rigging structure designed to fly or stack the KARA® and SB18 enclosures
The KARA-MINIBUEX bar is an optional rigging element. Used in pair with the KARA-MINIBU, it allows flying SB18 enclosures, or stacking KARA® enclosures
The KARA-PULLBACK is a rigging plate that allows setting the KARA® array in a pullback configuration. It connects to the bottom enclosure of the array and to the hook or stinger of an additional motor.
The M-BAR rigging bar is an optional element for the M-BUMP. Used as a single element or in pair, in flown and stacked configurations, it increases the site angle range for the KARA® and SB18 arrays
The M-BUMP is a rigging frame designed to fly or stack the KARA® and SB18 enclosures
The M-JACK platform package is a foot to be used by four units, along with one M-BUMP and two M-BARs, so as to form a stacking platform for KARA® and SB18 arrays.
Rigging frame for fying Kiva / Kiva II
Rigging frame for fying or stacking Kiva / Kiva II and SB15m
Rigging plate for ceiling or pole-mount of 3 Kiva / Kiva II maximum
Pullback accessory for Kiva / Kiva II
The K1-BUMP structure has been designed to fly the K/ K1-SB enclosures and the LA-RAK touring racks
The K1-CHARIOT2 is a dolly designed for moving and transporting a vertical assembly of 4 K1 or K1-SB enclosures
The K1-DELTA azimuth setting plate is a plate designed to be used optionally with the K1-BUMP or K2-BUMP, to adjust the azimuth angle of flown K1 / K1-SB : K2 arrays.
The K1-LASERMOUNT is a plate designed to be attached to the side of a Kl or K1-SB enclosure, in order to allow the installation of a remote laser/inclinometer sensor device. Three sensor models are supported: TEQSAS® LAP-TEQ (part of the L-ACOUSTICS® TECH TOOLCASE), ALIGNARRAY® UVM, and SSE® ProSight.
The K1-PLA is a dolly board designed to be attached to the K1 or K1-SB enclosure, for transportation and storage
The K2-CHARIOT is a transport dolly designed for moving and transporting a vertical assembly of 4 K2 enclosures
The K2-BAR rigging bar is an optional element for the K2-BUMP. Used alone or in pairs, it is designed to increase the site angle range for flown K2 arrays.
The K2-BUMP rigging frame is designed to fly K2 arrays.
The K2-JACK stabilizer is designed to allow the use of the K2-CHARIOT as a stacking platform.
The K2-LASERMOUNT support plate is designed to be attached to the side of a K2 or in a K2-BUMP, in order to allow the installation of a remote laser/inclinometer sensor device.Three sensor models are supported: TEQSAS® LAP-TEQ (part of the L-ACOUSTICS® TECH TOOLCASE), ALIGNARRAY® UVM, and SSE® ProSight.
The K2-LINK is a rigging interface designed to make the K2 rigging system compatible with the K1, K1-SB andK1-BUMP.
The K2-RACKMOUNT rigging interface is designed to allow stacking one or two LA-RAK on top of a K2 array flown with a K2-BUMP
The K2-RIGBAR rigging bar and pullback is designed to lift up to 12 K2 enclosures and to implement pullback configurations
The LA-SLING2T two-leg bridle chain sling is designed to lift specific L-ACOUSTICS deployments with two pickup points and one motor