L-Acoustics WIFO LIFT

200.00

For sale used L-Acoustics WIFO LIFT's - Bar for ARCS, these are all in perfect condition and the price is per piece.


20 in stock

Enquire
SKU: lwnq-89977 Categories: ,
20 in stock

Description

L-Acoustics WIFO LIFT – Bar for ARCS

  • Perfect condition
  • Used
  • Price above is per piece
  • Contact us in regards to quantities
Brand

Condition

Excellent

Warranty

72-hours

L'Acoustics M-BUMP

L'Acoustics Bumpers, Rigging and Dollies (all models)

Manufacturer's Description

L'Acoustics Bumpers, Rigging and Dollies (all models) include the WIFOBUMP2, WIFOBUMP2,  KARA-MINIBU, KARA-MINIBUEX, K2-BUMP and other frames and dollies designed specifically for L'Acoustics speaker systems and line arrays.

L'Acoustics Bumpers

L'Acoustics Bumpers, Rigging and Dollies (all models) include the WIFOBUMP2, WIFOBUMP2,  KARA-MINIBU, KARA-MINIBUEX, K2-BUMP

WIFOBUMP2, WIFOBUMP2

  • Rigging frame for flying a vertical ARCS WIDE/FOCUS/SB18m array. Certified for up to 8 ARCS WIDE/FOCUS or SB18m

WIFOLIFT2, WIFOLIFT3

  • Rigging bar for flying a horizontal ARCS WIDE/FOCUS array. Certified for up to 4 ARCS WIDE/FOCUS enclosures.

WIFOSOCK

  • Pole mount socket for 1 ARCS WIDE/FOCUS enclosure

CLAMP250

  • Clamp certified for up to 6 ARCS WIDE/FOCUS or 4 SB18m

WIFOTILT3

  • Support for stacking and tilting up to 4 ARCS WIFO on SB18m

KARA-ANGARMEX

  •  The KARA-ANGARMEX  is an optional extension arm for the stacking platform (built from M-BUMP or KARAMINIBU), to be used by two units, and providing extra 10° downwards site angle for the bottom enclosure of stacked KARA®  or SB18 arrays.

KARA-DOWNK1

  •  The KARA-DOWNK1  is a frame designed to allow the attachment of a KARA®  array under a K1 array.

 KARA-MINIBU

  •  The KARA-MINIBU  is a rigging structure designed to fly or stack the KARA®  and SB18 enclosures

KARA-MINIBUEX

  •  The KARA-MINIBUEX bar is an optional rigging element. Used in pair with the KARA-MINIBU, it allows flying SB18 enclosures, or stacking KARA®  enclosures

KARA-PULLBACK

  •  The KARA-PULLBACK is a rigging plate that allows setting the KARA®  array in a pullback configuration. It connects to the bottom enclosure of the array and to the hook or stinger of an additional motor.

M-BAR

  •  The M-BAR rigging bar is an optional element for the M-BUMP. Used as a single element or in pair, in flown and stacked configurations, it increases the site angle range for the KARA®  and SB18 arrays

M-BUMP

  •  The M-BUMP is a rigging frame designed to fly or stack the KARA®  and SB18 enclosures

M-JACK

  •  The M-JACK platform package is a foot to be used by four units, along with one M-BUMP and two M-BARs, so as to form a stacking platform for KARA®  and SB18 arrays.

KIBU II

  •  Rigging frame for fying Kiva / Kiva II

KIBU-SB

  •  Rigging frame for fying or stacking Kiva / Kiva II and SB15m

KIET II

  •  Rigging plate for ceiling or pole-mount of 3 Kiva / Kiva II maximum

KIVA-PULLBACK

  •  Pullback accessory for Kiva / Kiva II

K1-BUMP

  •  The K1-BUMP  structure has been designed to fly the K/ K1-SB enclosures and the LA-RAK touring racks

K1-CHARIOT2

  •  The K1-CHARIOT2  is a dolly designed for moving and transporting a vertical assembly of 4 K1 or K1-SB enclosures

K1-DELTA

  •  The K1-DELTA azimuth setting plate is a plate designed to be used optionally with the K1-BUMP or K2-BUMP, to adjust the azimuth angle of flown K1 / K1-SB : K2 arrays.

K1-LASERMOUNT

  •  The K1-LASERMOUNT  is a plate designed to be attached to the side of a Kl or K1-SB enclosure, in order to allow the installation of a remote laser/inclinometer sensor device. Three sensor models are supported: TEQSAS®  LAP-TEQ (part of the L-ACOUSTICS®  TECH TOOLCASE), ALIGNARRAY®  UVM, and SSE®  ProSight.

K1-PLA

  •  The K1-PLA  is a dolly board designed to be attached to the K1 or K1-SB enclosure, for transportation and storage

K2-CHARIOT

  •  The K2-CHARIOT is a transport dolly designed for moving and transporting a vertical assembly of 4 K2 enclosures

K2-BAR

  •  The K2-BAR rigging bar is an optional element for the K2-BUMP. Used alone or in pairs, it is designed to increase the site angle range for flown K2 arrays.

K2-BUMP

  •  The K2-BUMP rigging frame is designed to fly K2 arrays.

K2-JACK

  •  The K2-JACK stabilizer is designed to allow the use of the K2-CHARIOT as a stacking platform.

K2-LASERMOUNT

  •  The K2-LASERMOUNT support plate is designed to be attached to the side of a K2 or in a K2-BUMP, in order to allow the installation of a remote laser/inclinometer sensor device.Three sensor models are supported: TEQSAS®  LAP-TEQ (part of the L-ACOUSTICS®  TECH TOOLCASE), ALIGNARRAY®  UVM, and SSE®  ProSight.

K2-LINK

  •  The K2-LINK is a rigging interface designed to make the K2 rigging system compatible with the K1, K1-SB andK1-BUMP.

K2-RACKMOUNT

  •  The K2-RACKMOUNT rigging interface is designed to allow stacking one or two LA-RAK on top of a K2 array flown with a K2-BUMP

K2-RIGBAR

  •  The K2-RIGBAR rigging bar and pullback is designed to lift up to 12 K2 enclosures and to implement pullback configurations

LA-SLING2T

  •  The LA-SLING2T two-leg bridle chain sling  is designed to lift specific L-ACOUSTICS deployments with two pickup points and one motor

Manufacturer's Images


Additional information

Brand

Condition

Excellent

Warranty

72-hours

Reviews

There are no reviews yet.

Be the first to review “L-Acoustics WIFO LIFT”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…