Used Extron P/2 DA6xi
Used Extron P/2 DA6xi units are six-output VGA distribution amplifiers that split a single input signal and distribute it across six independently buffered outputs, supporting resolutions from VGA up to QXGA. Available second-hand from professional installations, the P/2 DA6xi suits anyone needing reliable multi-display VGA signal distribution. Scroll down to browse current used Extron P/2 DA6xi listings available now.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new Extron P/2 DA6xi is listed.
Extron P/2 DA6xi specifications
| Brand | Extron |
| Segment | Audio |
About the Extron P/2 DA6xi
The Extron P/2 DA6xi is a one-input, six-output VGA distribution amplifier housed in a 1U, half-rack-width, six-inch-deep metal enclosure that can be rack or under-desk mounted. It accepts a single 15-pin HD female connector and distributes the signal to six 15-pin HD female outputs. With 350 MHz of RGB video bandwidth at full load, the unit is compatible with VGA through QXGA resolutions and drives each output up to 250 feet (75 metres). Every output is individually buffered and amplified to preserve signal integrity and reduce noise. A video gain switch allows the signal to be boosted for longer cable runs, and an internal universal power supply is included.
Extron P/2 DA6xi — buyer FAQs
What is the Extron P/2 DA6xi and what does it do?
The Extron P/2 DA6xi is a one-input, six-output VGA distribution amplifier. It accepts a single 15-pin HD female input and splits the signal across six individually buffered and amplified 15-pin HD female outputs, preserving signal integrity and reducing noise interference. It supports resolutions from VGA through QXGA and can drive each output up to 250 feet (75 metres).
What video bandwidth and resolution support does the P/2 DA6xi offer?
The P/2 DA6xi provides 350 MHz of RGB video bandwidth at full load, measured at the -3 dB point. This supports the full range from VGA up to QXGA resolutions, making it compatible with a wide variety of graphics cards, projectors and flat panel displays without the need for separate signal boosting in most standard installations.
How is the Extron P/2 DA6xi typically installed, and does it include a power supply?
The P/2 DA6xi fits into a standard rack at 1U half-rack width, or can be mounted under a desk. Its metal enclosure is six inches deep. An internal universal power supply is included, so no external power brick is required. A video gain switch is also built in, allowing the signal to be boosted when driving longer cable runs approaching the 250-foot maximum.
Who makes the P/2 DA6xi and where does it fit in the Extron range?
The P/2 DA6xi is made by Extron, an American manufacturer of professional audiovisual equipment known for AV signal distribution, switching, scaling and control products used in pro AV installations. The P/2 DA6xi sits within Extron's distribution amplifier line, addressing straightforward multi-display VGA signal routing in fixed installations such as conference rooms and presentation environments.
What should I check when buying a used Extron P/2 DA6xi?
Confirm the unit powers on and that all six outputs are active and delivering a clean image at the resolution you need. Check that the video gain switch functions correctly, as this is essential for longer cable runs. The 15-pin HD connectors on both input and outputs should be free of bent pins or damage. Used listings on this page carry a 21-day warranty covering major functional faults; the buying guide at 10kused.com/used-av-equipment-guide/ covers the full process.
