Used AKG C411 range
Used AKG C411 range miniature condenser vibration pickups offer high-performance acoustic instrument amplification for guitar, mandolin, violin and most other string instruments, in an ultralight second-hand package weighing just 18g. The C411 series includes variants with different connector types to suit wired and wireless setups. Scroll down to browse the used AKG C411 listings currently available.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new AKG C411 range is listed.
AKG C411 range specifications
| Brand | AKG |
| Segment | Audio |
About the AKG C411 range
The AKG C411 range comprises high-performance miniature condenser vibration pickups designed for acoustic guitar, mandolin, violin and most other string instruments. The ultralight pickup (18g / 0.6oz) attaches on or near the bridge using a non-marking, solvent-free adhesive pad, avoiding any effect on instrument balance. The figure-of-eight polar pattern captures a frequency bandwidth of 10 to 18,000 Hz, with a sensitivity of 2 mV/Pa and an electrical impedance of 200 Ohms. The C411 PP features an MPAV standard XLR connector, while the C411 L provides a three-pin mini XLR connector compatible with AKG wireless bodypack transmitter systems.
AKG C411 range — buyer FAQs
What is the AKG C411 and which instruments is it designed for?
The AKG C411 is a miniature condenser vibration pickup designed for acoustic guitar, mandolin, violin and most other string instruments. It works as a contact pickup rather than a conventional microphone, attaching on or near the bridge to capture the instrument's vibration. Its figure-of-eight polar pattern covers a frequency bandwidth of 10 to 18,000 Hz, with a sensitivity of 2 mV/Pa and an electrical impedance of 200 Ohms.
Who makes the AKG C411 and where does it sit in the AKG range?
The C411 is made by AKG Acoustics, an Austrian audio company founded in 1947 in Vienna and now part of Harman International. The C411 sits within AKG's microphone and pickup range, addressing the specific need for unobtrusive contact miking of acoustic string instruments. The series includes at least two variants, the C411 PP and C411 L, differing primarily in their connector type.
What is the difference between the AKG C411 PP and the C411 L?
The two main variants differ in their connector. The C411 PP uses an MPAV standard XLR connector for wired setups, while the C411 L provides a three-pin mini XLR connector compatible with AKG wireless bodypack transmitter systems. Both share the same ultralight 18g capsule design and attach in the same way, so the choice depends on whether the performer uses a wired or wireless signal path.
How does the AKG C411 attach to an instrument, and does it affect playability?
The C411 attaches on or near the bridge using an included non-marking, solvent-free adhesive pad. At just 18g (0.6oz), the pickup is light enough that AKG states it does not change the balance of the instrument. The small physical dimensions (9.7mm length, 14.2mm width, 26.7mm height) keep it unobtrusive during performance.
What should I check when buying a used AKG C411?
Check which variant is listed, as the C411 PP and C411 L use different connectors, and confirm the connector suits your setup. Inspect whether the adhesive pad is included, since it is the primary mounting method. Condition of the capsule and cable is worth confirming with the seller. Used C411 units on 10K Used carry a 21-day warranty covering major functional faults; full detail is in the buying guide at https://www.10kused.com/used-av-equipment-guide/.
