Used JB Lighting Varyscan P3
Used JB Lighting Varyscan P3 units available here as a second-hand 250W HTI spot moving head, built around the BabySharXS HTI 250W double-ended lamp and delivering hotspot-free projection via dual condenser optics. Scroll down to browse current used Varyscan P3 listings from sellers around the world.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new JB Lighting Varyscan P3 is listed.
JB Lighting Varyscan P3 specifications
| Brand | JB Lighting |
| Segment | Lighting |
About the JB Lighting Varyscan P3
The JB Lighting Varyscan P3 is a 250W spot moving head fixture developed in cooperation with Osram, using the HTI 250W double-ended lamp to produce precise, hotspot-free images through dual condenser optics. Key features include two gobo wheels carrying five rotating, indexing and changeable glass gobos plus seven fixed metal gobos, 39 full colours and 35 half-colours across two colour wheels, a frost effect, iris, focus, and four interchangeable rotating prisms. Pan covers 430 degrees and tilt covers 270 degrees, with 22 DMX channels, three-pin and five-pin XLR sockets, stand-alone operation, and modular slide-in construction with Camloc quick-release fasteners. The unit accepts 115V or 230V at 50 to 60 Hz, draws a maximum of 480 VA, and weighs 20 kg.
JB Lighting Varyscan P3 — buyer FAQs
What is the JB Lighting Varyscan P3 and what type of fixture is it?
The JB Lighting Varyscan P3 is a 250W spot moving head developed in cooperation with Osram, built around the BabySharXS HTI 250W double-ended lamp. Dual condenser optics produce hotspot-free, precisely focused images. It covers 430 degrees of pan and 270 degrees of tilt, runs on 22 DMX channels, and weighs 20 kg, making it a full-featured stage and studio moving spot.
Who makes the Varyscan P3 and where does it come from?
JB Lighting is a German manufacturer of professional lighting fixtures, founded in 1990 and based in Blaustein near Ulm. The Varyscan P3 reflects the company's focus on German production standards, most visibly in its modular slide-in construction, Camloc quick-release fasteners, and the lamp alignment system developed alongside Osram that eliminates the need for manual lamp adjustment.
What colour and gobo options does the Varyscan P3 offer?
The Varyscan P3 carries two colour wheels providing 39 full colours and 35 half-colours. Its two gobo wheels hold five rotating, indexable and changeable glass gobos alongside seven fixed metal gobos. The combination of both gobo wheels with the unit's focus capability enables morphing effects, and a frost effect, iris and four interchangeable rotating prisms extend its range further.
What DMX and power requirements does the second-hand Varyscan P3 need?
The Varyscan P3 uses 22 DMX channels and accepts control via three-pin or five-pin XLR sockets. It operates on 115V or 230V at 50 to 60 Hz and draws a maximum of 480 VA. Stand-alone operation is also supported, and data updates are handled via the same XLR sockets, so no additional interface hardware is required for basic use.
What should I check when buying a used Varyscan P3?
On a used Varyscan P3 it is worth confirming the remaining life on the HTI 250W double-ended lamp, rated at 3,000 hours, and checking that the glass gobos are unchipped and the prisms rotate cleanly. Verify that the modular slide-in components and Camloc fasteners are all present. Listings on this page include condition details; purchases carry a 21-day warranty covering major functional faults, with full terms in the buying guide at 10kused.com/used-av-equipment-guide/.
