CM Lodestar 1 Ton Single Brake Motor 60′ Lift

CM (Columbus McKinnon) Lodestar

CM (Columbus McKinnon) Lodestar is a range of highly functional electric chain motors for various applications.

CM (Columbus McKinnon) Lodestar

Main features and specification for CM (Columbus McKinnon) Lodestar:

CM (Columbus McKinnon) Lodestar Classic

CM Lodestar Classic electric Chain Motor

• Capacities: 1/8 to 2 tons (Metric Rated)
• Lift: 60 ft. standard (other lifts available)
• Speeds: 5 to 100 F.P.M. at 60 Hz.
• Voltages: 1-phase and 3-phase available

IP66 Rating: An Ingress Protection (IP) Rating of 66 indicates that the Lodestar Classic offers protection from dust and high-pressure water - making this unit ideal for use in outdoor environments.

• High-performance composite cord grips: Prevent water from entering the motor body at the pendant and power cord points of entry.
• Continuous Gaskets: Create a waterproof seal between the gearbox assembly and the back frame and motor covers.
• O-Rings on Lift Wheel Bearing: Prevent water from entering the motor body through the lift wheel opening.
• Standard AC brake is designed for a long service life.
• Lifetime grease-lubricated gear box ensures better wear and smooth operation. Heavy-duty-rated motors.
• Standard external chain guide helps extend chain life.
• Duty Cycle: H-4 duty rated for heavy-duty applications. 2M+ FEM class. 50% duty cycle or 300 on/off per hour.
• Low Voltage Control: 110 volt for long cable runs without voltage drop. 24 and 48 volt optional. Single-phase and three-phase also available.
• Overload Protector: Helps prevent lifting of dangerous overloads.
• Over-travel Prevention: Adjustable limit switch prevents load from over-travel in both up and down directions.
• Lightweight, Cast-Aluminum Housing: Durable and strong cast-aluminum housing is black powder coated for low visibility.
• Metric Rated
• Road Ready: Easy to stow and travel.
• Lifetime Warranty: The industry's best warranty against manufacturing and material defects.

CM (Columbus McKinnon) Lodestar

CM Lodestar electric chain motor

• Capacities: 1/8 to 2 tons
• Standard Lift: 60 feet (other lifts available)
• Speeds: 5 to 100 feet/min.
• Voltages: 1-phase and 3-phase
• 5 Pocket Lift Wheel improves chain wear & smooth lifting
• Clutch Outside Gear Train meets international standards
• Precision Helical Gearing for quieter operation
• Redesigned Control Panel for easier access & fuse installation

CM (Columbus McKinnon) Lodestar D8+

CM Lodestar D8+ electric chain motor

• Capacities: 125 to 1500 kg
• Standard Lift: 60 feet (other Lifts available)
• Speeds: 5 to 64 feet/min.
• Voltages: 3-phase
• Electro-Mechanical Double Brakes
• 5 Pocket Lift Wheel for quiet & smooth operation.
• 68 dB Operational Noise a result of the Double Brake System.
• Precision Machined Gears heat treated for strength and durability.
• Internal Chain Guide: PVC black coated for quieter operation.
• Low Voltage Control: 110 Volt for long cable runs without voltage drop. 24 & 48 Volt optional.
• Duty Cycle: H-4 duty rated for heavy duty application. 2M+ FEM class. 50% Duty Cycle or 300 on/off per hour.
• 10:1 Mechanical Design Factor

CM (Columbus McKinnon) Lodestar BGV-C1 Series

CM Lodestar BGV-C1 Series electric chain motor

• Capacities: 250 to 1000 kg
• Standard Lift: 60 feet (other lifts available)
• Speeds: 16 to 100 feet/min.
• Electro-Mechanical Double Brakes
• 5 Pocket Lift Wheel for quiet & smooth operation.
• 68 dB Operational Noise a result of the Double Brake System.
• Precision machined gears heat treated for strength and durability.
• Internal Chain Guide PVC black coated for quieter operation.
• Low Voltage Control 110 Volt for long cable runs without voltage drop. 24 & 48 Volt optional.
• Duty Cycle H-4 duty rated for heavy duty application. 2M+ FEM class. 50% Duty Cycle or 300 on/off per hour.
• 10:1 Mechanical Design Factor
• Underload Protecion with load cell installed.
• Modular Multi-Pin Conncetor with multi-wire shielded cable.
• 4 Position Limit Switch with active spring micro-switch.
• Built-In PLC for safety function monitoring, brake and limit switch integrity, load cell reading, overload and underload settings.

Did not find what you need? Send us an enquiry _______________________________

Glossary:

CM (Columbus McKinnon) Lodestar 1t

Used CM (Columbus McKinnon) Lodestar 1t electric hoists are professional rigging motors renowned for their durable construction and dependable lifting performance, with a capacity of 1 tonne and lift heights available across multiple configurations. A trusted choice in the Lodestar series from Columbus McKinnon, second-hand units appear regularly on the market. Scroll down to browse the used Lodestar 1t listings currently available. The CM (Columbus McKinnon) Lodestar 1t is a professional electric chain hoist designed for a wide range of rigging applications in commercial, industrial and live event settings. Capable of lifting 1 tonne, the Lodestar 1t is available with varying lift heights, including configurations of 20 metres, 25 metres and 38 metres of chain. The Lodestar series is recognised for its robust construction, user-friendly operation and long-term reliability, making the used CM Lodestar 1t a practical choice for productions and installations where consistent, precise lifting is required.