Used Sanyo PLC-WTC500L
Used Sanyo PLC-WTC500L units offer a 5000 ANSI Lumen WXGA LCD projector with a dual-lamp system capable of up to 6,000 hours of projection and HDMI input for wide-aspect presentations. Available second-hand from sellers around the world, this model suits buyers seeking a reliable wide-screen multimedia projector. Scroll down to browse the used PLC-WTC500L listings currently available.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new Sanyo PLC-WTC500L is listed.
Sanyo PLC-WTC500L specifications
| Brand | Sanyo |
| Segment | Video |
About the Sanyo PLC-WTC500L
The Sanyo PLC-WTC500L is a portable wide multimedia projector delivering 5000 ANSI Lumens via LCD technology with UHP lamp illumination and true WXGA (16:10) resolution, making it compatible with wide-screen laptops. It features an HDMI input terminal and incorporates a dual-lamp system with multiple operating modes. The Alternating Mode balances use time across both lamps for combined operation roughly twice that of a single-lamp unit. The Relay Mode runs one lamp until its recommended replacement point, then switches automatically to the second, enabling uninterrupted presentations. A lamp switch timer can be set to rotate each lamp every one to 24 hours, supporting 24/7 continuous operation.
Sanyo PLC-WTC500L — buyer FAQs
What is the Sanyo PLC-WTC500L and what projection technology does it use?
The Sanyo PLC-WTC500L is a portable wide multimedia projector delivering 5000 ANSI Lumens through LCD technology with UHP lamp illumination. It produces true WXGA (16:10) resolution, making it compatible with wide-screen laptops, and includes an HDMI input terminal to support wide-aspect ratio presentations.
Who made the Sanyo PLC-WTC500L and what happened to the Sanyo projector range?
Sanyo was a Japanese electronics manufacturer whose professional projectors, identified by the PLC model prefix, were widely used in events, rental, staging and installation. Panasonic acquired Sanyo and consolidated the projector business under its own brand, with Sanyo withdrawing from the market in 2012. The PLC-WTC500L sits within that legacy PLC range.
How does the dual-lamp system on the PLC-WTC500L work?
The PLC-WTC500L carries two lamps and offers several operating modes. Alternating Mode rotates use between both lamps to balance wear, targeting a combined life of around 6,000 hours. Relay Mode runs the first lamp until its recommended replacement point, then switches automatically to the second. A timer can also be set to rotate lamps every one to 24 hours, enabling 24/7 continuous operation.
What should I check when buying a used Sanyo PLC-WTC500L?
Check the accumulated hours on each lamp individually, since the dual-lamp system means one lamp may be significantly more worn than the other. Confirm the HDMI input and any other terminals are functional, and verify the LCD panel shows no dead zones. Used units on 10K Used carry a 21-day warranty covering major functional faults; full detail is in the buying guide at https://www.10kused.com/used-av-equipment-guide/.
