Used I-pix BB 4 wash lighting fixtures offer an energy-saving, high-power LED light source with four custom Lamina Light Engines and smooth 16-bit control, making tungsten emulation genuinely convincing in a second-hand unit. The homogenised colour mixing delivers believable whites and saturated colours without the usual compromises of LED technology. Scroll down to browse the used I-pix BB 4 listings currently available.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new I-pix BB 4 is listed.
I-pix BB 4 specifications
| Brand | I-pix |
| Segment | Lighting |
About the I-pix BB 4
The I-pix BB 4 is a wash lighting fixture built around four custom Lamina Light Engines, described as among the highest-power point-source LED options available. Operating at 120 watts and drawing half an amp at 240 volts, the fixture blends three saturated colours into a homogenised output that removes visible signs of conventional LED technology. Colour mixing is tight to i-pix's own specifications, enabling convincing tungsten temperatures as well as daylight colour temperatures without amber compensation. Super-smooth 16-bit resolution control and multiple operating modes make the second-hand BB 4 straightforward to use and easy to integrate alongside existing rigs.
I-pix BB 4 — buyer FAQs
What is the I-pix BB 4 and what makes its LED output unusual?
The I-pix BB 4 is a wash lighting fixture built around four custom Lamina Light Engines, described as among the highest-power point-source LED options available. The three saturated colours are homogenised so the output shows no visible signs of conventional LED technology. This blended approach gives the fixture believable whites and accurate colour mixing without the typical compromises associated with LED wash lights.
Can a used I-pix BB 4 genuinely emulate tungsten lighting?
Yes. The BB 4 is built to i-pix's own tight colour specifications, which allow tungsten colour temperatures to be reproduced convincingly. It can also reach daylight temperatures without needing an amber nudge to correct the white. The 16-bit resolution control adds a super-smooth dimming response that further supports the feel of a traditional tungsten fixture.
How much power does the I-pix BB 4 consume?
The BB 4 runs at 120 watts and draws half an amp at full output on a 240-volt supply, which i-pix describes as energy-saving for the light level produced. That relatively low draw makes it practical to run multiple units on a single circuit and reduces overall touring or installation power budgets compared with conventional wash fixtures of similar output.
Who makes the I-pix BB 4 and where does it sit in the range?
The BB 4 is made by I-pix, a manufacturer focused on LED wash lighting. The BB 4 sits within their BB series and uses custom Lamina Light Engines specified to i-pix's own colour tolerances, distinguishing it from fixtures built around off-the-shelf LED components. Multiple operating modes are included to suit different control environments and user preferences.
What should I check when buying a used I-pix BB 4?
Confirm the number of operating modes available and verify that the 16-bit dimming curve feels smooth across its full range, as uneven control can indicate LED engine wear. Check that all four Lamina Light Engines are working and that colour balance matches across them. Used units are covered by 10K Used's 21-day warranty for major functional faults; full detail is in the buying guide at 10kused.com/used-av-equipment-guide/.
