Used Tomcat Swing wing truss 30 x 30 spigoted
Used Tomcat Swing Wing Truss 30x30 Spigoted is a touring truss system featuring swing wings and steel spigots, capable of supporting up to three lamp bars. Available in standard lengths sized to accommodate three or four moving heads, it is a practical structural solution for touring and production rigs. Browse the second-hand Tomcat Swing Wing Truss listings available below to find the right configuration for your setup.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new Tomcat Swing wing truss 30 x 30 spigoted is listed.
Tomcat Swing wing truss 30 x 30 spigoted specifications
| Brand | Tomcat |
| Segment | Rigging |
About the Tomcat Swing wing truss 30 x 30 spigoted
The Tomcat Swing Wing Truss 30x30 Spigoted is a touring truss built with steel spigots and aluminium construction throughout. Main chords are 2-inch OD by 3/16-inch aluminium, with 1.5-inch OD by 1/8-inch aluminium diagonals. Standard lengths come in 96 inches (3 bay, fitting 3 moving heads) and 126 inches (4 bay, fitting 4 moving heads), with each configuration supporting up to 3 lamp bars. Accessories include a third caster assembly and cable hooks. The truss is fabricated by AWS and SFL certified welders, making the second-hand Tomcat Swing Wing a reliable choice for touring production rigs.
Tomcat Swing wing truss 30 x 30 spigoted — buyer FAQs
What is the Tomcat Swing Wing Truss 30x30 Spigoted and what is it used for?
The Tomcat Swing Wing Truss 30x30 Spigoted is a touring truss system designed for production and touring rigs. It features swing wings and steel spigots, and is built to support up to three lamp bars. Standard lengths are sized to fit either three or four moving heads, making it a practical structural element for live events and touring setups that require reliable, repeatable rigging.
What are the standard lengths and configurations available for the Swing Wing Truss 30x30 Spigoted?
The truss comes in two standard lengths: 96 inches, which is a 3-bay configuration fitting three moving heads, and 126 inches, a 4-bay configuration fitting four moving heads. Both lengths support up to three lamp bars. Accessories associated with the truss include a third caster assembly and cable hooks, which extend its practical use in touring environments.
What materials and construction standards are used in the Tomcat Swing Wing Truss 30x30?
The main chords are 2-inch OD by 3/16-inch aluminium, and the diagonals are 1.5-inch OD by 1/8-inch aluminium. Steel spigots are used for connections. The truss is fabricated by AWS and SFL certified welders, which reflects a defined standard of weld quality relevant to structural rigging applications.
Who makes the Swing Wing Truss 30x30 Spigoted?
The Swing Wing Truss 30x30 Spigoted is made by Tomcat, a manufacturer of truss products for the touring and production industry. This particular model sits within their touring truss range, designed specifically around the practical demands of moving-head placement and lamp bar support in live production rigs.
What should I check when buying a used Tomcat Swing Wing Truss 30x30 Spigoted?
Check the condition of the steel spigots for wear, deformation or corrosion, as these are critical connection points. Inspect the aluminium chords and diagonals for any bends or weld damage, and confirm the length (96-inch or 126-inch) matches your rig requirements. Verify whether the caster assembly and cable hooks are included. Every listing on this page carries a 21-day warranty covering major functional faults; full detail is in the buying guide at 10kused.com/used-av-equipment-guide/.
