Used K-Array Python-KP102 I
Used K-Array Python-KP102 I is a compact line array speaker, one metre long and just over three inches wide, housing twelve 3.15-inch neodymium magnet woofers for long-throw performance and high vocal intelligibility. Available second-hand from professional audio resellers worldwide, this model suits installations and touring applications where a slim, high-output array is needed. Scroll down to browse current used Python-KP102 I listings available now.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new K-Array Python-KP102 I is listed.
K-Array Python-KP102 I specifications
| Brand | K-Array |
| Segment | Audio |
About the K-Array Python-KP102 I
The K-Array Python-KP102 I is a pure line array measuring one metre in length and just over three inches in width. Its twelve closely-spaced 3.15-inch neodymium magnet woofers deliver a frequency response of 120 Hz to 18 kHz (-6 dB), a rated power of 720 W AES and a peak SPL of 134 dB, with a sensitivity of 99 dB SPL (1W/1m). Vertical coverage spans 7 to 30 degrees and horizontal coverage is 90 degrees. A key feature of the KP102 I is its selectable nominal impedance of 4 ohms or 16 ohms, allowing up to four units to be driven from a single amplifier channel. Connections are via SpeakOn NL4. Pairing the KP102 I with a compatible Thunder or Rumble subwoofer extends coverage across the full musical frequency range.
K-Array Python-KP102 I — buyer FAQs
What is the K-Array Python-KP102 I and what is it designed to do?
The K-Array Python-KP102 I is a pure line array speaker measuring one metre long and just over three inches wide. Its twelve closely-spaced 3.15-inch neodymium magnet woofers are configured for long-throw projection, covering 120 Hz to 18 kHz (-6 dB) with high vocal intelligibility. Vertical dispersion is selectable between 7 and 30 degrees, and horizontal coverage is 90 degrees, making it suited to installations and touring where a slim, high-output array is required.
What does the selectable impedance on the KP102 I mean in practice?
The Python-KP102 I allows the user to switch between 4 ohm and 16 ohm nominal impedance. At 16 ohms, up to four KP102 I units can be driven from a single amplifier channel operating at 4 ohms. This flexibility simplifies system design, reduces the number of amplifier channels needed and makes integration with existing amplifier setups more straightforward.
What subwoofer does the Python-KP102 I pair with to cover the full musical frequency range?
The Python-KP102 I reproduces the vocal frequency range from 120 Hz upward on its own. To extend coverage across the full musical frequency range, it is designed to integrate with K-Array Thunder or Rumble subwoofers. Adding a compatible subwoofer fills in the low-frequency content that the KP102 I's twelve 3.15-inch woofers do not cover by themselves.
Who makes the Python-KP102 I?
The Python-KP102 I is made by K-Array. The model sits within the brand's line array speaker range and reflects a design approach focused on compact physical dimensions combined with high output, as shown by the KP102 I's one-metre form factor, 134 dB peak SPL and 720 W AES rated power.
What should I check when buying a used Python-KP102 I?
Confirm whether the impedance selector is functioning correctly, as the 4 ohm and 16 ohm switching is central to how this speaker is deployed. Check the SpeakOn NL4 connectors for damage and verify that all twelve neodymium woofers are operating without distortion across the 120 Hz to 18 kHz range. Each listing on this page shows condition detail from the seller. Every 10K Used purchase includes a 21-day warranty covering major functional faults; full terms are in the buying guide at 10kused.com/used-av-equipment-guide/.
