Used MA Lighting MA 2Port Node onPC PRO
Used MA Lighting MA 2Port Node onPC PRO is an Ethernet-to-DMX conversion node offering 1,024 parameters and full integration into the MA System via MA-Net2, sACN and Art-Net. Designed for rig-mounting in trusses or mobile applications, this second-hand unit works as a powerful show controller for smaller setups when paired with grandMA2 onPC. Browse the used MA 2Port Node onPC PRO listings available below to find the right unit for your setup.
1 listed right now — list yours to the buyers searching this model.
Get an email when a new MA Lighting MA 2Port Node onPC PRO is listed.
MA Lighting MA 2Port Node onPC PRO specifications
| Brand | MA Lighting |
| Segment | Lighting |
| Typical used price | $257 (range $257–$257) |
About the MA Lighting MA 2Port Node onPC PRO
The MA Lighting MA 2Port Node onPC PRO converts Ethernet data into DMX data and vice versa, delivering 1,024 parameters of DMX output. Housed in a rig-mounted box, it suits truss installations and mobile applications alike. In combination with grandMA2 onPC it becomes a capable show controller for smaller productions and serves as a handy backup solution for reduced budgets. The unit accepts Power over Ethernet or an internal power supply, and supports MA-Net2, MA-Net, sACN and Art-Net for stand-alone or integrated use. Remote configuration, including input and output assignment, can be managed from any grandMA console or grandMA2 onPC.
MA Lighting MA 2Port Node onPC PRO — buyer FAQs
What does the MA Lighting MA 2Port Node onPC PRO do?
The MA Lighting MA 2Port Node onPC PRO converts Ethernet data into DMX data and vice versa, providing 1,024 parameters of DMX output. It integrates fully into the MA System via MA-Net2, MA-Net, sACN and Art-Net, and can also operate in stand-alone mode with any compatible MA-Net2, sACN or Art-Net system. Remote configuration, including input and output assignment, is handled from any grandMA console or grandMA2 onPC.
How does the MA 2Port Node onPC PRO differ from the standard MA 2Port Node onPC?
The key difference is parameter count. The standard MA 2Port Node onPC outputs 512 parameters of DMX, while the PRO version doubles that to 1,024 parameters. Both share the same rig-mounted form factor, Power over Ethernet support and MA System integration, but the PRO suits applications where a higher DMX parameter ceiling is needed.
What is the MA 2Port Node onPC PRO typically used with?
The MA 2Port Node onPC PRO is designed for use alongside grandMA2 onPC, where it functions as a show controller for smaller productions or as a backup solution for reduced budgets. It also supports stand-alone operation with MA-Net2, sACN and Art-Net systems. Its rig-mounted box format makes it well suited to truss installations and mobile applications.
Who makes the MA 2Port Node onPC PRO and where does it sit in their range?
The MA 2Port Node onPC PRO is made by MA Lighting International GmbH, a German manufacturer founded in 1983 and known for the grandMA family of lighting consoles and networking products. The 2Port Node onPC PRO sits within MA Lighting's networking and node range, acting as the higher-parameter companion to the standard 2Port Node onPC and integrating directly with grandMA2 onPC and grandMA consoles.
What should I check when buying a used MA 2Port Node onPC PRO?
Confirm the unit powers up via both its internal supply and, if needed, Power over Ethernet. Check that both DMX ports function correctly and that network protocol settings (MA-Net2, sACN, Art-Net) are accessible and resettable. Verify the full 1,024-parameter output is operational rather than locked to a lower figure. Used listings on this page include a 21-day warranty covering major functional faults; the buying guide at 10kused.com/used-av-equipment-guide/ covers the process in full.
