Used Meyer Sound MSL-5
Used Meyer Sound MSL-5 units offer an extremely high-power, high-definition loudspeaker system built for large-scale music reinforcement and public address applications, combining consistent directivity with seamless point-source arraying for precise coverage control. Available second-hand, the MSL-5 is a proven choice for touring concert reinforcement, stadiums, outdoor arenas and paging systems. Scroll down to browse the used Meyer Sound MSL-5 listings currently available.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new Meyer Sound MSL-5 is listed.
Meyer Sound MSL-5 specifications
| Brand | Meyer Sound |
| Segment | Audio |
About the Meyer Sound MSL-5
The Meyer Sound MSL-5 is an extremely high-power, high-definition loudspeaker system designed for large-scale touring concert reinforcement, paging and announcing, outdoor sports arenas, stadiums and racetracks. Its all-horn, integral cabinet is a 30-degree arrayable section housing two proprietary 12-inch cone low-frequency drivers in a vented, horn-loaded enclosure, plus three 2-inch throat, 4-inch diaphragm high-frequency horn drivers. The cabinet includes handles and rigging lift rings rated at a 1,500 lb. maximum safe working load, bolted to an internal steel frame. The MSL-5 requires the M-5 Control Electronics Unit, with a standard minimum configuration of two cabinets, and is compatible with SIM System II. It covers the vocal range effectively on its own for paging use, and pairs with the DS-2 Mid-Bass Loudspeaker for fuller low-frequency performance in music reinforcement contexts.
Meyer Sound MSL-5 — buyer FAQs
What is the Meyer Sound MSL-5 and what applications is it designed for?
The Meyer Sound MSL-5 is a high-power, high-definition loudspeaker system built for large-scale touring concert reinforcement, paging and announcing, outdoor sports arenas, stadiums and racetracks. Its all-horn cabinet delivers consistent directivity and point-source arraying for precise coverage control. It handles the vocal range alone for paging use and pairs with additional low-frequency support for full music reinforcement.
What are the key hardware components inside the MSL-5 cabinet?
The MSL-5 cabinet is a 30-degree arrayable section containing two proprietary 12-inch cone low-frequency drivers in a vented, horn-loaded enclosure, plus three high-frequency horn drivers with 2-inch throats and 4-inch diaphragms. The cabinet is fitted with handles and rigging lift rings bolted to an internal steel frame, rated to a 1,500 lb. maximum safe working load.
What additional equipment does the MSL-5 require to operate?
The MSL-5 requires the M-5 Control Electronics Unit and its standard minimum configuration is two loudspeaker cabinets. For music reinforcement where fuller low-frequency output is needed, it is used alongside the DS-2 Mid-Bass Loudspeaker. It is also compatible with SIM System II for measurement and alignment.
Who makes the MSL-5 and where does it sit in the Meyer Sound range?
The MSL-5 is made by Meyer Sound Laboratories, an American professional audio company founded in 1979 and based in Berkeley, California. Meyer Sound is known for loudspeakers, subwoofers, line arrays and measurement tools for sound reinforcement and installation. The MSL-5 represents the high-power end of the range, targeting large-scale touring and stadium applications.
What should I check when buying a used MSL-5?
Confirm that the M-5 Control Electronics Unit is included, since the MSL-5 will not function without it, and verify that a minimum of two cabinets is available if a complete system is needed. Check the condition of the rigging lift rings and internal steel frame fixings, and inspect the horn drivers and low-frequency cones. Used listings on 10K Used carry a 21-day warranty covering major functional faults; full detail is in the buying guide at 10kused.com/used-av-equipment-guide/.
