Used Robe ClubSpot 300 CT
Used Robe ClubSpot 300 CT units offer a dynamic spot moving head fixture built around a 250W compact high-pressure metal halide lamp, with motorised focus, a 11-colour wheel and six rotating glass gobos. Second-hand examples of this fixture are a practical choice for clubs and touring rigs alike. Scroll down to browse the current used Robe ClubSpot 300 CT listings available on 10K Used.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new Robe ClubSpot 300 CT is listed.
Robe ClubSpot 300 CT specifications
| Brand | Robe |
| Segment | Lighting |
About the Robe ClubSpot 300 CT
The Robe ClubSpot 300 CT is a spot moving head fixture driven by a 250W compact high-pressure metal halide lamp on a GY9.5 base, with approved sources including the Osram HSD 250/80 and Philips MSD 250/2. It features a standard 15-degree objective with optional 12-degree and 18-degree alternatives, plus a remotely controllable motorised focus. The colour wheel carries 11 colours plus white with rainbow effects in both directions, while the gobo wheel holds six rotating, indexable and replaceable glass gobos. Control runs via USITT DMX-512 across 14 or 16 channels in three protocol modes, with pan and tilt resolution switchable between 8-bit and 16-bit. Master/slave and stand-alone operation are both supported, along with three user-editable programs of up to 99 steps each. The EU model weighs 20.5 kg and operates at 208/230/240 V, 50/60 Hz at 500 VA power consumption.
Robe ClubSpot 300 CT — buyer FAQs
What is the Robe ClubSpot 300 CT and what lamp does it use?
The Robe ClubSpot 300 CT is a spot moving head fixture built around a 250W compact high-pressure metal halide lamp on a GY9.5 base. Approved lamp types include the Osram HSD 250/80, Philips MSD 250/2 and Sylvania BA 250/2 SE. It includes a remotely controllable motorised focus and runs from a magnetic ballast, drawing 500 VA at 230 V.
How many DMX channels does the ClubSpot 300 CT use and what control options does it support?
The ClubSpot 300 CT operates on either 14 or 16 DMX channels across three protocol modes using USITT DMX-512, with data carried on locking 3-pin XLR connectors. Pan and tilt resolution is switchable between 8-bit and 16-bit. It also supports master/slave and stand-alone operation, and allows three user-editable programs of up to 99 steps each.
What gobos and colour options does the second-hand ClubSpot 300 CT offer?
The fixture carries a colour wheel with 11 colours plus white, producing rainbow effects in both directions. The gobo wheel holds six rotating glass gobos, comprising one effect gobo, three black and white gobos, one multicolour gobo and one dichroic gobo, plus an open position. All gobos are indexable and replaceable, with a specified outside diameter of 26.8 mm.
Who makes the ClubSpot 300 CT and where does it sit in the Robe range?
The ClubSpot 300 CT is made by Robe Lighting, a Czech manufacturer of moving lights and entertainment fixtures founded in 1994 and based in Roznov pod Radhostem, Czech Republic. Robe designs products for concerts, theatre, television and events with worldwide distribution. The ClubSpot 300 CT represents the company's discharge-based spot moving head category, aimed at club and touring applications.
What should I check when buying a used Robe ClubSpot 300 CT?
Confirm which lamp is fitted, as the fixture accepts the Osram HSD 250/80, Philips MSD 250/2 or Sylvania BA 250/2 SE, and check remaining lamp hours where possible. Verify the objective lens angle supplied (standard 15 degrees, with 12 and 18 degree options available) and that all six gobos are present and undamaged. Each 10K Used listing includes a 21-day warranty covering major functional faults; full buying guidance is at https://www.10kused.com/used-av-equipment-guide/.
