Used Robe Wash 250 XT
Used Robe Wash 250 XT moving head wash fixtures are available here on 10K Used, offering a 250W high-pressure metal halide source with full CMY colour mixing and a manually adjustable beam angle for stage, show, events and decorative lighting applications. Second-hand units deliver professional DMX-512 control across 16 channels in a well-specified package. Scroll down to browse the current used Robe Wash 250 XT listings available now.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new Robe Wash 250 XT is listed.
Robe Wash 250 XT specifications
| Brand | Robe |
| Segment | Lighting |
About the Robe Wash 250 XT
The Robe Wash 250 XT is a 250W moving head wash effect fixture designed for stage, show, events and decorative lighting applications. It is powered by a compact high-pressure metal halide lamp (Philips MSD 250W/2, GY-9.5 base) paired with a magnetic ballast and a 150mm Fresnel lens with a manually adjustable beam angle from 8° to 22°. Colour output is handled by a CMY mixing system (Cyan, Magenta and Yellow each 0-100%), a colour wheel carrying dichroic filters, 3200K and 5600K correction filters and a UV filter, plus an effect wheel offering a beam shaper and frost filter. Movement spans 530° pan and 280° tilt with 8- or 16-bit resolution, controlled via USITT DMX-512 across 16 channels. A 4-digit LED display, built-in demo sequences, master/slave operation and a built-in fault-finding analyser support setup and programming. Data connections use locking 3-pin XLR, and the unit is rigged via two pairs of M10 mounting holes or a mounting bracket.
Robe Wash 250 XT — buyer FAQs
What is the Robe Wash 250 XT and what is it used for?
The Robe Wash 250 XT is a 250W moving head wash effect fixture designed for stage, show, events and decorative lighting applications. It uses a compact high-pressure metal halide lamp with a 150mm Fresnel lens, CMY colour mixing, a colour wheel with dichroic and correction filters, and an effect wheel carrying a beam shaper and frost filter. Pan covers 530° and tilt 280°.
Who makes the Robe Wash 250 XT and where does it sit in the range?
The Robe Wash 250 XT is made by Robe Lighting, a Czech manufacturer of moving lights and entertainment fixtures that builds products for concerts, theatre, television and events. The Wash 250 XT sits in the company's moving head wash category, offering a full-featured DMX-512 controlled wash fixture with CMY mixing at the 250W lamp level.
What beam angle and colour mixing does the Robe Wash 250 XT offer?
The Robe Wash 250 XT has a manually adjustable beam angle ranging from 8° to 22° via its 150mm Fresnel lens. Colour is produced by a full CMY mixing system, with Cyan, Magenta and Yellow each variable from 0 to 100%, alongside a colour wheel carrying dichroic filters, 3200K and 5600K correction filters, and a UV filter.
How is the Robe Wash 250 XT controlled and programmed?
The Robe Wash 250 XT operates via USITT DMX-512 across 16 control channels, with data carried on locking 3-pin XLR connectors. It supports 8-bit or 16-bit pan and tilt resolution, master/slave operation, built-in demo sequences, and tracking and vector movement control. A 4-digit LED display and a built-in fault-finding analyser assist with setup and diagnostics.
What should I check when buying a second-hand Robe Wash 250 XT?
Check that the Philips MSD 250W/2 lamp is functional and note its hours, since replacement is the most common running cost on this fixture. Confirm the CMY flags, colour wheel and effect wheel all move correctly, and that pan and tilt reach their full 530° and 280° ranges. Rigging hardware and any mounting bracket should be present. Each listing on this page carries a 21-day warranty covering major functional faults; full details are in the buying guide at 10kused.com/used-av-equipment-guide/.
