Used SGM LT-200
Used SGM LT-200 pixel tubes are IP65-rated RGB LED fixtures designed for immersive indoor and outdoor video and light installations, offering 3D spatial effects through pixel mapping and media control. Available second-hand, these transparent LED tubes suit a wide range of touring, scenography and fixed installation applications. Scroll down to browse the used SGM LT-200 listings currently available.
No listings currently in stock. This page stays live — check back or register interest.
0 listed right now — list yours to the buyers searching this model.
Get an email when a new SGM LT-200 is listed.
SGM LT-200 specifications
| Brand | SGM |
| Segment | Video |
About the SGM LT-200
The SGM LT-200 is a transparent IP65-rated RGB pixel LED tube built for 3D graphic light and video installations. Each two-metre tube houses 2 x 54 pixels across two 130-degree viewing angles, with a 35 mm pixel pitch, and supports up to 162 controllable DMX channels per tube. Control is handled via SGM's TLD-612A or ILD drivers, with the system operable through DMX-512A, a dedicated video server, or a PC running ArtNet. SGM's ArtNet Configurator software handles full system configuration. With an LED rated lifetime of 50,000 hours and a practically maintenance-free design, the LT-200 is suited to touring, TV scenography, theme parks, exhibitions, clubs and permanent installations.
SGM LT-200 — buyer FAQs
What is the SGM LT-200 and what is it designed for?
The SGM LT-200 is a transparent IP65-rated RGB pixel LED tube designed for immersive 3D graphic light and video installations, indoors or outdoors. Each two-metre tube carries 2 x 54 pixels across two 130-degree viewing angles with a 35 mm pixel pitch. It suits touring productions, TV scenography, theme parks, exhibitions, clubs and permanent installations where pixel mapping and media control are required.
How is the SGM LT-200 controlled, and what software does it use?
The LT-200 operates via DMX-512A, a dedicated video server, or a PC running ArtNet, with the ArtNet signal distributed through a third-party ArtNet to DMX converter. Up to six units can be driven by SGM's TLD-612A or ILD driver. SGM's ArtNet Configurator software handles full system configuration, supporting both ArtNet and DMX-512A setups when used with those drivers.
How many DMX channels does a used SGM LT-200 require?
A single LT-200 tube supports up to 162 controllable DMX channels. Each tube houses 2 x 54 RGB pixels across two independent 130-degree viewing angles, so channel count will vary depending on the control mode selected. Buyers planning multi-tube installations should factor this into their DMX universe capacity when sizing a controller or driver system.
Who makes the SGM LT-200 and where does it sit in the SGM range?
The LT-200 is made by SGM, a professional LED lighting manufacturer founded in Italy in 1975 and now headquartered in Aarhus, Denmark. SGM focuses on weatherproof, IP-rated fixtures for live events, touring, architectural and entertainment use. The LT-200 represents their pixel tube format, complementing the company's broader range of moving heads, wash lights, strobes and blinders.
What should I check when buying a second-hand SGM LT-200?
Verify that the transparent tube housing is intact with no cracks that could compromise the IP65 rating, and confirm the LED pixel count across both viewing angles is fully functional with no dead pixels. Check whether SGM TLD-612A or ILD drivers are included, as these are needed to run up to six units. Used listings on this page include a 21-day warranty covering major functional faults; full details are in the buying guide at 10kused.com/used-av-equipment-guide/.
