Used CM (Columbus McKinnon) Lodestar

CM (Columbus McKinnon) Lodestar

Main features and specification for CM (Columbus McKinnon) Lodestar:

CM (Columbus McKinnon) Lodestar Classic

CM Lodestar Classic electric Chain Motor

• Capacities: 1/8 to 2 tons (Metric Rated)
• Lift: 60 ft. standard (other lifts available)
• Speeds: 5 to 100 F.P.M. at 60 Hz.
• Voltages: 1-phase and 3-phase available

IP66 Rating: An Ingress Protection (IP) Rating of 66 indicates that the Lodestar Classic offers protection from dust and high-pressure water - making this unit ideal for use in outdoor environments.

• High-performance composite cord grips: Prevent water from entering the motor body at the pendant and power cord points of entry.
• Continuous Gaskets: Create a waterproof seal between the gearbox assembly and the back frame and motor covers.
• O-Rings on Lift Wheel Bearing: Prevent water from entering the motor body through the lift wheel opening.
• Standard AC brake is designed for a long service life.
• Lifetime grease-lubricated gear box ensures better wear and smooth operation. Heavy-duty-rated motors.
• Standard external chain guide helps extend chain life.
• Duty Cycle: H-4 duty rated for heavy-duty applications. 2M+ FEM class. 50% duty cycle or 300 on/off per hour.
• Low Voltage Control: 110 volt for long cable runs without voltage drop. 24 and 48 volt optional. Single-phase and three-phase also available.
• Overload Protector: Helps prevent lifting of dangerous overloads.
• Over-travel Prevention: Adjustable limit switch prevents load from over-travel in both up and down directions.
• Lightweight, Cast-Aluminum Housing: Durable and strong cast-aluminum housing is black powder coated for low visibility.
• Metric Rated
• Road Ready: Easy to stow and travel.
• Lifetime Warranty: The industry's best warranty against manufacturing and material defects.

CM (Columbus McKinnon) Lodestar

CM Lodestar electric chain motor

• Capacities: 1/8 to 2 tons
• Standard Lift: 60 feet (other lifts available)
• Speeds: 5 to 100 feet/min.
• Voltages: 1-phase and 3-phase
• 5 Pocket Lift Wheel improves chain wear & smooth lifting
• Clutch Outside Gear Train meets international standards
• Precision Helical Gearing for quieter operation
• Redesigned Control Panel for easier access & fuse installation

CM (Columbus McKinnon) Lodestar D8+

CM Lodestar D8+ electric chain motor

• Capacities: 125 to 1500 kg
• Standard Lift: 60 feet (other Lifts available)
• Speeds: 5 to 64 feet/min.
• Voltages: 3-phase
• Electro-Mechanical Double Brakes
• 5 Pocket Lift Wheel for quiet & smooth operation.
• 68 dB Operational Noise a result of the Double Brake System.
• Precision Machined Gears heat treated for strength and durability.
• Internal Chain Guide: PVC black coated for quieter operation.
• Low Voltage Control: 110 Volt for long cable runs without voltage drop. 24 & 48 Volt optional.
• Duty Cycle: H-4 duty rated for heavy duty application. 2M+ FEM class. 50% Duty Cycle or 300 on/off per hour.
• 10:1 Mechanical Design Factor

CM (Columbus McKinnon) Lodestar BGV-C1 Series

CM Lodestar BGV-C1 Series electric chain motor

• Capacities: 250 to 1000 kg
• Standard Lift: 60 feet (other lifts available)
• Speeds: 16 to 100 feet/min.
• Electro-Mechanical Double Brakes
• 5 Pocket Lift Wheel for quiet & smooth operation.
• 68 dB Operational Noise a result of the Double Brake System.
• Precision machined gears heat treated for strength and durability.
• Internal Chain Guide PVC black coated for quieter operation.
• Low Voltage Control 110 Volt for long cable runs without voltage drop. 24 & 48 Volt optional.
• Duty Cycle H-4 duty rated for heavy duty application. 2M+ FEM class. 50% Duty Cycle or 300 on/off per hour.
• 10:1 Mechanical Design Factor
• Underload Protecion with load cell installed.
• Modular Multi-Pin Conncetor with multi-wire shielded cable.
• 4 Position Limit Switch with active spring micro-switch.
• Built-In PLC for safety function monitoring, brake and limit switch integrity, load cell reading, overload and underload settings.

Did not find what you need? Send us an enquiry

_______________________________

Glossary: